SeaPROFILER DF 300kHz 2 in
The SeaPROFILER ADCP’s are well suited for real-time current profiling applications such as coastal monitoring, where a bottom mounted or surface-deployed configuration is used with a hard-wired communications and power source. The ability for the SeaPROFILER to also track the bottom allows it to be used in moving boat applications as well.
Manufacturer
RoweTech
12655 Danielson Court,
Suite 306
Poway, CA 92064 USA
USA
+1 858 842 3020
+1 858 842 3021
Technical specifications
| Frequency | 300kHz |
| Max. profiling range | 150 m (narrow band); 100 m (broad band) |
| Cell size | 2.0 cm minimum |
| Operating depth | 300m, 1000m, 3000m |
| Max. transmit | |
| Blank distance | 0.4m |
| Accuracy | ± 0.70%, ± 2mm/s |
| Max. water velocity | +/- 20 m/s |
| Number of cells | up to 200 |
| Max. ping rate | 1-2Hz typical;10Hz max |
| Transducer | 3 in |
| Transducer beam angle | 2.70° |
| Housing | Acetal / Aluminum / Titanium |
| Communication | RS-485, RS232, 100Base T /Ethernet (self- contained only) |
| Internal memory | 32Gb |
| Transducer assembly diameter | 225mm |
| Housing diameter | 200mm |
| Overall length | 195mm (300m, 1000m)/221mm (6000m) |
| Weight in air | 9.1 |
| Weight in water | 1.8 |
| Temperature accuracy | +/- 0.15ºC |
| Temperature range | -5º - 70º C |
| Tilt accuracy | <1°RMS |
| Tilt range | Roll ±180°, Pitch±90° |
| Compass accuracy | 1ºRMS |
| Compass max. tilt | 0-360º |