OALC4

Alcatel has developed a complete range of fibre optic submarine cables, one of them being the OALC4 cable family. The OALC4 cable has been designed specially for repeatered systems, benefiting from our past extensive experience in the conception and development of submarine fibre optic cables.
The cable design is based on a welded steel tube, housing up to 12 fibres in a stress-free environment to ensure a long lifetime.
At the heart of the cable is the fibre unit structure where the optical fibres are set in a steel tube and are protected by a jelly from water penetration.
The composite conductor is composed of the fibre unit structure protected by a very high-strength steel wire vault, surrounded by a seam-welded copper tube swaged onto the steel wires.
Longitudinal watertightness is provided by a water-blocking material.
The composite conductor is insulated with high-density polyethylene. The insulation also provides abrasion resistance (four times more resistant than conventional insulants). This structure is used for deep-sea deployment and is our lightweight cable (LW) type.
The OALC4 cable may be used at any sea depth between 0 and 8000 meters for the 1.6 ohm/km version and between 0 and 7000 meters for the 1.0 ohm/km version.
Armoured cables use the deep-sea cable (LW) structure, and additional protection is provided according to the conditions and nature of the seabed.

Manufacturer

Alcatel-Lucent
Alcatel-Lucent

54 rue de la Boétie
75008 Paris
France

+33 1 40 76 10 10

http://www.alcatel-lucent.com

Technical specifications

Type
Core
Cable diameter
Bending radius
Colour
Depth rating
Weight in air
Weight in water
Breaking strenght
Conductor resistance
Insulation resistance
Operating voltage
Capacitance
Bandwidth
Impedance
Attenuation
Temperature
Filler
Shield
Outer jacket

Random manufacturers (more)

Browse sensors (263)

Browse hardware components (214)

Browse deep sea observatory related services (3)