Esonet Yellow Pages

The Turbidity sensor detects light scattered by particles suspended in water. This measurement is known to have a good correlation to the amount of suspended matter in water and can be used to monitor e.g. sediment, algae or particle pollution. The sensor generats an output voltage proportional to the turbidity or suspended solids.

The low power consumption makes it ideal for applications where battery drain is a concern.

The sensor offset voltage is within 1 mV of zero and requires no adjustment across gains.

The unique optical design confi nes the sensing volume to within 5 cm of the sensor allowing near-bottom measurements and minimizing errant refl ections in restricted spaces.

The Turbidity sensor can be mounted directly on the top-end plate of the AADI RDCP; the sensor output signal is Raw data readings. The output signal from the Analog converter is in SR-10 format.